OUR PRODUCTS
Thermal insulation coating
Bronya Wall & Wall NF
The budget version of the Bronya Facade modification
[ninja_form id=3]
Isolation thermique ultra-mince Bronya Wall
Bronya Wall Liquid Thermal Insulation is an economical ultra-thin thermal insulation that has similar characteristics to Bronya Facade.
The result of successful partial implementation of import substitution technologies in production. Ultra-thin thermal insulation, which can be applied in layers up to 1 mm thick at a time, with increased vapor permeability. It is very effective in eliminating frost penetration, condensation formation, fungal formations, etc. Protects the surrounding structures of buildings and structures against heat loss without disturbing the exchange of humidity and air between the premises and the environment.
Ultra-thin thermal insulation Bronya Wall is an ultra-thin liquid ceramic thermal insulation material that can be applied in layers with a thickness of 1 mm at a time, and has the vapor permeability of a facade paint high quality (0.03). Bronya Wall is a high viscosity weatherproof composition specially designed for thermal insulation of vertical surfaces. The coating, applied to the wall from the inside or from the outside, forms a single seamless surface, retains heat throughout the volume of the room, which has a positive effect on the microclimate.
Bronya wallcovering reflects up to 80% of the visible solar and infrared radiation spectrum. This leads to a significant reduction in the heating of interior spaces in cold weather and in air conditioning costs in hot weather, it can reduce heat loss by up to 30%. Thermal insulation coating Bronya Wall is a durable material with high adhesion to any building materials, with good vapor permeability, it has hydrophobic (water-repellent) properties.
Bronya Wall liquid ceramic thermal insulation is used for thermal insulation of plaster, concrete, brick, other wooden surfaces of enclosing structures of buildings and structures during external and internal works. Bronya Wall ceramic heat insulator can be coated with acrylic paint on a water-dispersion basis, wallpapering is allowed. Bronya Wall stain is only authorized subject to strict compliance with our technical data sheet, following our recommendations for the choice of tinting pastes, technical shades.
The application of the Bronya Wall coating allows:
- Carry out thermal insulation of walls both externally and internally;
preserve the volume of usable area (with thermal insulation of the walls from the inside); - Does not increase the load on the building structure;
- Insulate facades with complex architectural solutions (including during reconstruction works);
- Increase the thermal comfort of the room;
- Reduce construction costs and time.
Request a free sample and view our listed specifications!
You can familiarize yourself with the Bronya Wall instructions in the Technical Documentation section.
The main feature of budget changes is their cost. Budget modifications are more affordable by 20-30% on average, however, such modifications have all the necessary certifications: for the flammability group (G1 and NF, respectively), a sanitary-epidemiological sector and a certificate of conformity. We present to your attention a test of comparative measurement of the temperature on the surface of the modifications Bronya Universal, Bronya Classic and Bronya Light.
Comparative measurements of thermal conductivity of budgetary modifications of thermal insulation Bronya.
Summary table of measurement results
| Modification | Classic (1,5 mm) |
Wagon Armor Station (1,5 mm) |
Light (1,5 mm) |
|---|---|---|---|
| base t °C | 128 | 132 | 132 |
| surface t °C | 47 | 50 | 60 |
| *Thermal conductivity | 0,0012 | 0,0014 | 0,0022 |
* Conductivité thermique du matériau basée sur des calculs normatifs et mathématiques, basés sur les indicateurs thermophysiques de ces mesures.
Isolation thermique ultra-mince Bronya Wall NF
Modification Bronya Wall NF, identical in the form of release and packaging, with a low-fuel (base) modification.
Important notification !
We are not currently aware of non-combustible (NF) thermal insulation coatings similar and having a thermal conductivity of 0.001 identical to our basic modifications – complete competing analogues of these modifications from other manufacturers of thermal insulation products .
But on the market there are:
- Non-combustible coatings with an NF certificate, including those of manufacturers of thermal insulation materials with a certain (or without) thermophysical effect, offering to apply on their basic (G1) modifications (by the way, without confirmation of thermal conductivity ) in order to supposedly obtain a final thermal insulation coating with NF certification
- ZhKTM is a material that has NF certification, but has the declared thermal physics 2-8 times (mostly without any legitimate confirmation of thermal conductivity at all) greater than “one thousandth”.
Request a free sample and view our listed specifications!
You can familiarize yourself with the Bronya Wall NF instructions in the Technical Documentation section.
